Architecture Jobs

About the Position: As the Engineering & Construction Division, Design Branch Chief, you will provide overall leadership, direction, and oversight of Branch operations and multidisciplinary engineering and design functions. This position may be filled with any of the following job series: 0808 - Supervisory Architect 0810 - Supervisory Civil Engineer 0830 - Supervisory Mechanical Engineer 0850 - Supervisory Electrical Engineer Formulate branch policies, operating procedures, and long-range program goals across multidisciplinary civil works and military construction (MILCON) engineering design initiatives. Exercise delegated financial management authority by forecasting program budgets, monitoring expenditures, and allocating fiscal resources across subordinate operational sections. Determine long-range workforce requirements and procures architect-engineer (A-E) contract services to supplement in-house engineering and design capacity. Monitor and assess contractor deliverables against technical engineering specifications to validate performance and authorize commercial invoice disbursements. Direct operations through subordinate supervisory Section Chiefs, delegating functional authority, establishing workflow priorities, and streamlining branch business processes. Establish performance standards, appraise subordinate supervisors, and serve as the second level reviewing official on non-supervisory employee evaluations to maintain equity. Plan and administer branch-wide technical training initiatives, intern developmental assignments, and specialized engineering seminars to address emerging competencies. Adjudicate formal workplace grievances, investigate complex employee complaints (including EEO and anti-harassment), and approve disciplinary or corrective actions. Approve and manage personnel actions, within-grade increases, overtime authorizations, travel expenses, and employee incentive awards. Serve as senior engineering advisor to District and Division leadership, delivering technical solutions on high-visibility, complex, or controversial design challenges. Act as primary liaison representing the agency with external federal, state, and local regulatory authorities, commercial partners, and the public. Represent the organization on regional engineering task forces, advisory committees, and technical review boards, including the Regional Navigation Design Team. Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Civilian Employees of the Organization Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.O.) 13473 Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Qualification Requirements: The qualification standards describing the minimum individual occupational series qualification requirements are linked below. Architect Series, 0808: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Professional Engineering Series, 0810, 0830, 0850: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes (1) leading multidisciplinary engineering and design programs for civil works or military infrastructure projects, including budget formulation, resource allocation, and contract administration for Architect-Engineer (A-E) services; (2) reviewing engineering documents for technical adequacy; (3) coordinating and integrating complex engineering efforts across subordinate teams; (4) resolving programmatic, technical, and policy issues to ensure consistency in engineering decisions and policy application. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-13). You will be evaluated on the basis of your level of competency in the following areas: Administration and Management Design Leadership Technical Competence Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-13).

About the Position: You will serve as a Subject Matter Expert (SME) Lead in a team environment providing technical expertise, guidance, and/or oversight for the District's most complex projects related to their expertise. Serves as the principle advisor to the Division Chief regarding all technical matters relating to expertise. Perform assignments and work with the Project Delivery Teams (PDTs) and subject matter Community of Practice (CoP) in developing guidance, performing complex engineering to solve complex problems, and providing technical oversight Promote expertise/knowledge transfer through cooperative efforts with less experienced team members. Evaluate project site conditions, leads teams to resolution of engineering issues, performs investigations and studies, generates or provides input for plans and specifications, and develops Standard Operating Procedures (SOPs) and guidance. Use complex engineering tools as part of the modeling, design, and document production process. Investigate complex projects to determine the problem areas and the recommended solutions. Analyze design features for incorporation into project planning and design documents. Prepare preliminary and final designs, technical analyses, layouts, and computations for preparation of contract drawings, policy/technical compliance reviews, and coordination with CoP for best practice assurances. Conduct site inspections, forms technical conclusions, and provides oral or written reports containing recommendations for action. Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Architect: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. Basic Requirement for Engineer: Civil Engineer (0810), Environmental Engineer (0819), General Engineer (0801),Mechanical Engineer (0830), Electrical Engineer (0850): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for a Geologist: A. Degree: Bachelor's degree (or higher degree) in geology, plus 20 additional semester hours in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography. OR B. Combination of Education and Experience: Course work as shown in A above, plus appropriate experience or additional education. (Note: Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant's professional geological competence. To receive credit for geological experience obtained in positions that are not full-time professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.)

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: This is an Interdisciplinary position for the US Army Engineer District, Philadelphia Engineering & Construction Division, Technical Services Branch located in Philadelphia, PA. Works under the general supervision of the Chief, Technical Services Branch with whom discussions are held as to the broad overall scope of work. Serves as Chief, Engineering Management Section, with primary responsibility for managing the technical coordination accomplishment of pre-construction engineering Serves as Chief, Engineering Management Section, with primary responsibility for design products for numerous complex and diverse civil works, military and IIS projects in a major geographic area. As Section Chief, leads, directs, coordinates and supervises the activities of 10-12 engineers and engineering technicians to ensure mission accomplishment. Plans work, sets goals and objectives, establishes priorities and deadlines, considering relative complexity and difficulty of the work, supervises accomplishment and evaluates products and performance. Directs planning, programming, budgeting, execution of the technical work, and formulation of policy within the Section. Confers with and participates in meetings and conferences with representatives from offices of higher authority to furnish information and data in justification of engineering decisions Oversees reviews of designs and cost estimates for civil works, military and IIES designs prepared by architect-engineers Supervises and directs all upward reporting and administrative, budgetary and manpower functions required in connection with the assigned program and in support of Engineering and Construction Division. Reviews recommendations for contract bid awards. Supervises the constant check on condition of allocated funds and requests outlining a need for additional money. This announcement uses a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Specialized Experience: One year of specialized experience which includes any combination of (3) of the following: 1) Experience coordinating the accomplishment of pre-construction engineering and design projects; 2) experience with monitoring budgeting and funding of engineering projects; 3) experience with reviewing contract bid awards; and 4) experience leading a team of engineering professionals. This definition of specialized experience is typical work performed at the next lower grade/level position in the federal service (GS-12). In addition to meeting the above Specialized Experience, candidates must also meet the Basic Requirements list below. BASIC EDUCATIONAL REQUIREMENT FOR: GENERAL ENGINEER 0801 / CIVIL ENGINEER 0810 / MECHANICAL ENGINEER 0830 / ELECTRICAL ENGINEER 0850: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

About the Position: Serves as the District's Subject Matter Expert (SME) in an environment providing technical expertise, guidance, and/or oversight for the District's most complex projects related to their expertise. This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. Perform assignments and work with the various Project Delivery Teams (PDTs) and subject matter Community of Practice (CoP) in developing guidance, performing complex engineering to solve complex problems. Provide technical oversight relating to expertise. Serve as a recognized authority in incumbent's specialized field of expertise and is assigned responsibility over engineering activities associated with projects or subject matter. Evaluate project site conditions, leads teams to resolution of engineering issues, performs investigations and studies. Generate or provides input for plans and specifications, and develops Standard Operating Procedures (SOPs) and guidance for others to follow. Perform reconnaissance and investigation of complex projects to determine the problem areas and the recommended solutions. Analyze existing features to determine best method of accomplishing complex studies, investigation, or design. Participate in technical and special inspections to assure continuity of design throughout the planning, design, and/or construction period. Coach the various teams in the selection and application of appropriate problem solving methods and techniques, provides advice on work methods, practices and procedures. Assist various teams and/or individual members in identifying the parameters of a viable solution. Represent the District in meetings with regional, national, and/or outside entities including construction contractors, the designated non-federal sponsor, and other local government officials. Perform design, document, and drawing reviews and oversight duties. Responsible for NFPA 70 (National Electric Code), basic interior/exterior lighting design. Responsible for power distribution, grounding and lightning protection systems design, security, CCTV, and lighting systems design, basic fire detection and alarm systems, basic ladder logic and industrial controls systems design. Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Architect: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. Basic Requirement for Engineer:Civil Engineer (0810), Environmental Engineer (0819), Mechanical Engineer (0830), Electrical Engineer (0850): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET);OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting one of the basic requirements above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience for the GS-13: One year of specialized experience including design and management of a multidisciplinary team in these areas of emphasis: structural design, civil site design, or navigation facility design and provide technical expertise, guidance, and oversight for complex engineering projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12)

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: Serves as a technical manager responsible for planning, coordinating, and resolving major or unusual multi-discipline engineering problems associated with the design and construction of major military facilities. Monitor Architect Engineer (AE) contracts for major complex design products. Advise contractor of the interpretation of criteria, policies, technical procedures, and priorities. Provide engineering expertise and technical knowledge for unique, complex, and innovative facilities including interfaces with installed equipment and operational testing, all of which utilize advanced, newly developed technology. Assist other technical managers or project managers in AE surveillance, monitoring, site visits, value engineering, and design improvement studies. Work closely with the project managers and resident engineers to identify technical issues requiring engineering input and to establish issue priorities. Lead engineering team activities to develop final decisions regarding complex, often controversial technical matters, many of which influence the design configuration and construction of multiple facilities and sites. Guide and lead the evaluation of contractors and government agencies in designing novel, highly specialized facilities. Plan, coordinate, evaluate, and review all phases of the design process to ensure interpretation and integration of and technical compliance with criteria, regulations, policies, and procedures Consult and coordinate with representatives of industry and other government agencies to ascertain plans and requirements, new developments, systems, or methods which may have a bearing on the technical aspects of assigned projects. Formulate basic criteria for major new facilities based upon the knowledge of regulatory requirements, examination of user requirements, inspection of actual site conditions and existing facilities. Direct the activities of the organization, including personnel management responsibilities of each subordinate branch chiefs. Plan organizational structure and staffing needs. Promote sound position management principles and programs with the advice and assistance of personnel, manpower, and management specialists. Observe workers' performance and periodically evaluate employee performance, and/or review evaluations made by subordinate supervisors. Evaluate the performance of subordinate supervisors. Who May Apply: US Citizens In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for an Architect 0808: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. (Note: You must attach a copy of your transcripts.) OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note: You must attach a copy of your transcripts.) Basic Requirement for Engineers 0810, 0830, 0850: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes: 1) managing engineering organizations with technically diverse backgrounds focusing on medical facility design and construction; 2) exercising significant responsibilities in dealing with officials of other units or organizations; 3) developing and executing program and operating budgets in accordance with fiscal law; and 4) performing and/or reviewing engineering design work on federal medical facilities. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-14). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: This position is located with the Directorate of Public Works, Fort Campbell, KY. Perform project/program manager duties. Recommend programs and development plans for construction, renovation and improvements of real property facilities at major installations or complexes. Plan/design new construction, renovation and improvement projects for a variety of real property facilities. Monitor large-scale facilities engineering projects. Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Architect: 1. Degree: Architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR 2. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: 1. Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations. 2. Experience: An applicant lacking a degree in architecture must have had l year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes: 1) Preparing architectural or engineering scopes of work; 2) Creating contract packages to ensure compliance with real property; and 3) Monitoring things such as construction project schedules, design work or cost estimates. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

About the Position: This position is located with the Directorate of Public Works, Fort Campbell, KY. Perform project/program manager duties. Recommend programs and development plans for construction, renovation and improvements of real property facilities at major installations or complexes. Plan/design new construction, renovation and improvement projects for a variety of real property facilities. Monitor large-scale facilities engineering projects. Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian Employees Current Department of Defense (DOD) Civilian Employee (non-Army) Defense Civilian Intelligence Personnel System (DCIPS) Interchange Agreement Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.O.) 13473 Non-Appropriated Fund Instrumentality (NAFI) Non-Department of Defense (DoD) Transfer Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Architect: 1. Degree: Architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR 2. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: 1. Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations. 2. Experience: An applicant lacking a degree in architecture must have had l year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes: 1) Preparing architectural or engineering scopes of work; 2) Creating contract packages to ensure compliance with real property; and 3) Monitoring things such as construction project schedules ,design work or cost estimates. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

About the Position: This announcement is for an Interdisciplinary - Contract Administration Lead, GS-13, position within the Rock Island District, Engineering and Construction Division, Construction Branch located in Rock Island, IL and may be filled under any of the following occupational series, depending on the qualifications of the applicant and needs of the agency: Architect, 0808 Civil Engineer, 0810 Environmental Engineer, 0819 Mechanical Engineer, 0830 Electrical Engineer, 0850 Work is performed in direct support of, and in coordination with, Resident and Area Engineers and Chief, Construction Branch, as well as other office and District technical and administrative specialists. Responsible for direction and performance of activities involving primarily construction quality assurance work for the Branch surveillance and supervision of contract construction activities at various geographically dispersed project sites. Perform a variety of specialized technical construction oriented and related project management duties in the completion of Technical Manager (TM) assignments. Provide input as appropriate to establish a realistic construction program and that monetary funding is properly allocated to the program. Perform or direct pre-award investigations and review, provide direct contract administration assistance to Area Engineers, reviews contract specifications and drawings for biddability, constructability, operability and environmental compliance. Review solicitation documents, provisions, and schedules, and technical and administrative submittals from contractors. Investigate situations in controversy with contractor which have or are expected to lead to formal claims by the contractor, arising out of such things as contract changes, labor strikes, unfavorable weather, unforeseen working conditions, etc. Determine justifiable time extensions resulting from contract changes or due to excusable causes as provided for under terms of the contract. Perform direct support of, and in coordinate with, Resident and Area Engineers and Chief, Construction Branch, as well as other office and District technical and administrative specialists. Develop written operating procedures and technical guidance for the branch Confer with Chief, Construction Branch, other District program managers and specialists, and resident or area engineers in planning, directing, and coordinating construction activities at the various project locations throughout the District. Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. Basic Requirement for Architect, 0808 A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. Basic Requirement for Civil Engineer, 0810; Environmental Engineer, 0819; Mechanical Engineer, 0830; Electrical Engineer, 0850: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes Experience providing technical and administrative field control over construction being performed by contractor and subcontractors, such as interpreting plans and contract requirements and maintaining the continuing inspection of operations, conducting preconstruction conferences and advising contractors of contract requirements and general manner in which work is to be accomplished, etc.; Experience making on-the-site decisions regarding compliance with contract provisions and environmental harmony and exercising engineering judgment where practical solutions to problems are encountered; Experience in providing technical oversight and guidance to construction inspectors and representatives. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: Chief of the Civil Works Program Branch, Programs and Project Management Division (PPMD) Supervisory Interdisciplinary that may be filled with any one of the following GS -14 series: Architecture Civil Engineering Mechanical Engineering Electrical Engineering As the Civil Works Program Branch Chief and senior program manager, the incumbent has overall responsibility for planning civil works programs, projects, and assignments within the Philadelphia District's (NAP) area of responsibility. Provides executive level supervision over the multi-million dollar programming, design, and construction program funds, from conceptual stages through project completion. Coordinates and manages all aspects of programs throughout their life cycle. Reviews and coordinates program design and construction schedules, as well as, procurement schedules, to ensure that customer requirements are being properly recognized, priorities are being met, and commitments are realistic. Directs and ensures the orderly transfer of completed construction projects to government agency officials. Responsible for the management and oversight, coordination, and review of all work of the branch. Directs the activities of assigned project managers who are responsible for establishing, scheduling, and monitoring programming and construction projects. Represents the division in conferences, meetings, presentations, and technical negotiations with other agency personnel Conducts personnel administration to accomplish assigned mission requirements This announcement uses the DHA for Certain Personnel of the DoD Workforce direct hire authority to recruit and appoint qualified candidates to certain positions in the competitive service. Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for SUPERVISORY ARCHITECT (0808): A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. Basic Requirement for SUPERVISORY CIVIL ENGINEER (0810), SUPERVISORY MECHANICAL ENGINEER (0830), OR SUPERVISORY ELECTRICAL ENGINEER (0850): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting one of the basic requirements above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes 1) Establish project goals, priorities, and schedules of Civil Works projects such as Coastal Storm Risk Management (CSRM), Navigation, Feasibility Studies, or Plan Formulation; and 2) Assess engineering resources and forecast budget and manpower; and 3) Direct work assignments; and 4) Establish policy, program requirements and objectives for Civil Works projects, while ensuring compliance with organizational goals. This definition of specialized experience is typical of work performed at the next lower grade/level position if the federal service (GS-13).

About the Position: The selectee performs a variety of Architectural duties related to the development of architectural designs and writing detailed specifications for new construction, interior, and exterior alterations, restorations, additions, and repairs to existing buildings and structures. Serve as an Architect within the Design Branch of Engineering and Construction Division. Responsible for all aspects of architectural design for facilities including new construction, renovations of existing structures, and other architectural design support for assigned civil works and military program projects. Serve technical or design team leader on assigned in-house, A/E, and Design-Build projects. Develop spatial requirements and relationships, code analysis, coordinate building design elements, create building floor plans, elevations, and sectional relationships, development of construction drawings, design analysis, and specifications. Coordinate architectural design work and life safety requirements at all stages of design . Collaborate with structural, mechanical, electrical, environmental, civil site, cost, other engineers, and other designers and integrates engineer discipline requirements to produce a coordinated design. Research, program, plan, and design new buildings or extensions or alterations to existing structures. Restore and conserve historic structures by applying knowledge of architectural design, construction detailing and procedures, building and life safety codes, and building materials and systems. Develop general and detailed drawings, design analyses, computations and calculations, and technical specifications for architectural features of assigned projects. Perform office and field architectural duties associated with field verification, in house design, reviews, and support during construction. Utilize computer aided design and drafting systems and three-dimensional building information modeling in the design and development of design and construction contract drawings Evaluate technical data pertaining to materials, equipment, shop drawings, proposals for modifications and additions. Evaluate methods of installation submitted by contractors and performs reviews for technical feasibility, adequacy and compliance with specifications. Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Civilian Employees of the Command Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.O.) 13473 Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Architect GS-12: NOTE: You must provide a copy of your transcript. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. In addition to meeting one of the basic requirements above, to qualify for this position you must also meet the qualification requirements listed below: Minimum Qualification requirements for the GS-12: Specialized Experience: One year of specialized experience which includes professional knowledge of architectural concepts, principles, and practices applicable to a broad range of architectural, engineering, construction management, life cycle management, and related assignments; ability to apply comprehensive architectural practices, methods, and techniques to perform relatively complex projects with complete responsibility; knowledge of design and construction practices and techniques in establishing design parameters and preparing project documents and specifications; knowledge of computer aided design and drafting (CADD) programs to perform complex design and drafting assignments, convey design concepts and ideas, and formulate working drawings; and knowledge of and familiarity with related fields of work (ie various engineering groups) to ensure areas of overlapping responsibilities receive proper design consideration. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11) Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

About the position: Serves as Project Engineer with responsibility for the administration, management, and engineering supervision over construction activities at a number of project sites in a major geographical area. The nature and range of projects include but are not limited to Military Construction (MILCON), Operations and Maintenance (O&M), construction, and/or rehabilitation. Direct construction activities to ensure compliance with contract requirements, engineering specifications, safety standards, quality assurance, and project schedules. Coordinate with contractors, government personnel, stakeholders, and technical teams to resolve construction issues and maintain project progress Ensure projects are completed in accordance with federal regulations, engineering standards, budget requirements, and established project milestones. Evaluates construction program activities to ascertain if objectives are met and that a proper and effective control over construction operations is maintained Negotiates with contractor, the costs involved on requests for time extensions and additional work or changes to original contract as a result of unforeseen site conditions. Who May Apply: US Citizens In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Supervisory Engineer (0810/0830): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for Supervisory Architect (0808): A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. In addition to meeting the basic requirements above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience that demonstrates the ability to manage and administer complex construction projects. Specialized experience includes: (1) planning, coordinating, and overseeing multiple construction projects; reviewing plans, specifications, shop drawings, contractor schedules, and quality control programs to ensure technical compliance and constructability; and monitoring contractor performance, construction progress, quality, safety, and contract compliance; AND/OR (2) providing technical guidance and resolving engineering and construction issues; AND/OR (3) conducting construction inspections, recommending acceptance of completed work, and evaluating contractor requests for time extensions, equitable adjustments, and contract modifications; AND/OR (4) preparing technical reports, findings, and recommendations to support project execution and contract administration. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).